Hi, I am doing presentation “Raspberry PI as attack vector”, one of the things that I will mention is pwnpi as pentest distro for raspberry. Is there any way to get your logo in some high resolution format to use as background? Thx in advance.
Hi,
first of all thanks for the great work you are doing. I intended to do something similar to your project and even had the website and apt-repositories up. Unfortunatly during the process I learned about the so called “hacker paragraph” in germany, that prohibits the distribution of software that can be used to break into IT systems. Although there are no records that this paragraph was used against anyone in court, the legal situation here is still very confusing. So basically all I wanted to do is thank you for your effort. Keep up the good work and maybe you could add mdk3 for version 3.
You know what will be nice to include on next version of pwnpi?
mdk3 –help
MDK 3.0 v6 – “Yeah, well, whatever”
by ASPj of k2wrlz, using the osdep library from aircrack-ng
And with lots of help from the great aircrack-ng community:
Antragon, moongray, Ace, Zero_Chaos, Hirte, thefkboss, ducttape,
telek0miker, Le_Vert, sorbo, Andy Green, bahathir and Dawid Gajownik
THANK YOU!
MDK is a proof-of-concept tool to exploit common IEEE 802.11 protocol weaknesses .
IMPORTANT: It is your responsibility to make sure you have permission from the
network owner before running MDK against it.
This code is licenced under the GPLv2
MDK USAGE:
mdk3 [test_options]
Try mdk3 –fullhelp for all test options
Try mdk3 –help for info about one test only
TEST MODES:
b – Beacon Flood Mode
Sends beacon frames to show fake APs at clients.
This can sometimes crash network scanners and even drivers!
a – Authentication DoS mode
Sends authentication frames to all APs found in range.
Too much clients freeze or reset some APs.
p – Basic probing and ESSID Bruteforce mode
Probes AP and check for answer, useful for checking if SSID has
been correctly decloaked or if AP is in your adaptors sending range
SSID Bruteforcing is also possible with this test mode.
d – Deauthentication / Disassociation Amok Mode
Kicks everybody found from AP
m – Michael shutdown exploitation (TKIP)
Cancels all traffic continuously
x – 802.1X tests
w – WIDS/WIPS Confusion
Confuse/Abuse Intrusion Detection and Prevention Systems
f – MAC filter bruteforce mode
This test uses a list of known client MAC Adresses and tries to
authenticate them to the given AP while dynamically changing
its response timeout for best performance. It currently works only
on APs who deny an open authentication request properly
g – WPA Downgrade test
deauthenticates Stations and APs sending WPA encrypted packets.
With this test you can check if the sysadmin will try setting his
network to WEP or disable encryption.
I just got my rpi. After testing the basic Debian image (which works verry well), I want to test your image. But I can`t get it run on the rpi. I prepared the 8gb SD card on win7 with the diskmanager32 and on ubuntu with dd…… but in no dass, the rpi is booting.
Have you an idea, what cause the issue?
Hi,
I have a problem installing Pwn Pi on my Raspberry Pi model b
there are also a few others which also have similar issues.
my Raspberry Pi works when i flash Raspbian “wheezy”
when when i try and flash Pwn Pi all i get is a constant red light and nothing on the display. any help would be much appreciated
regards
Hey! Is it possible to get a build that does not have XFCE installed on it? Or can it be removed with apt? Id love a CLI only version of this distribution
a while ago I downloaded the image and was quite happy for it, since I do pentests for a living. However I got my new 512MB box and it does not boot on it.
Any ideas? I do see the green LED blinking shortly and then nothing no activity at all.
I even rewrote the image to the SD card same effect. Wrote an archlinux image to the same SD card it boots.
When connected to a tv via HDMI I do not see anything happening.
Hello,
Been attemtping to find out what is wrong as i want and need pwnpi on my 512 raspi.
After i flash the image and boot up the raspi, i get NO video on HDMI or RCA, all other images work such as wheezy and rbmc, but not pwnpi.. just no video.
Can you please help?
There are a lot of issues with the PwnPi not booting on the newer Raspberry PI’s.
Its easily fixed by copying the newer firmware files on the /boot/ partition.
I was wondering if you could make a new image (2.0.1 perhaps) which have these new updates files already in place?
I have 7 Pis, all working, running various distros. I tried PwnPi 2.0 on several of them. The checksum is valid. I tried SanFisk 4G Class 4, PNY 16G Class 10, the same HDSDs that boots Rasbian with no problem. I get *no* response whatsoever. Just the single red power LED. Any suggestions?
Hi, I am doing presentation “Raspberry PI as attack vector”, one of the things that I will mention is pwnpi as pentest distro for raspberry. Is there any way to get your logo in some high resolution format to use as background? Thx in advance.
The new PWNPi v3.0 is up and now supports the 512 model – check it out when you have some time.. Thanks for using http://PWNPi.com
Kip
add sslstrip
The new PWNPi v3.0 is up and now supports the 512 model – check it out when you have some time.. Thanks for using http://PWNPi.com
Kip
Hi,
first of all thanks for the great work you are doing. I intended to do something similar to your project and even had the website and apt-repositories up. Unfortunatly during the process I learned about the so called “hacker paragraph” in germany, that prohibits the distribution of software that can be used to break into IT systems. Although there are no records that this paragraph was used against anyone in court, the legal situation here is still very confusing. So basically all I wanted to do is thank you for your effort. Keep up the good work and maybe you could add mdk3 for version 3.
Lorenz
The new PWNPi v3.0 is up and now supports the 512 model – check it out when you have some time.. Thanks for using http://PWNPi.com
Kip
Nice work with your distro!!!
You know what will be nice to include on next version of pwnpi?
mdk3 –help
MDK 3.0 v6 – “Yeah, well, whatever”
by ASPj of k2wrlz, using the osdep library from aircrack-ng
And with lots of help from the great aircrack-ng community:
Antragon, moongray, Ace, Zero_Chaos, Hirte, thefkboss, ducttape,
telek0miker, Le_Vert, sorbo, Andy Green, bahathir and Dawid Gajownik
THANK YOU!
MDK is a proof-of-concept tool to exploit common IEEE 802.11 protocol weaknesses .
IMPORTANT: It is your responsibility to make sure you have permission from the
network owner before running MDK against it.
This code is licenced under the GPLv2
MDK USAGE:
mdk3 [test_options]
Try mdk3 –fullhelp for all test options
Try mdk3 –help for info about one test only
TEST MODES:
b – Beacon Flood Mode
Sends beacon frames to show fake APs at clients.
This can sometimes crash network scanners and even drivers!
a – Authentication DoS mode
Sends authentication frames to all APs found in range.
Too much clients freeze or reset some APs.
p – Basic probing and ESSID Bruteforce mode
Probes AP and check for answer, useful for checking if SSID has
been correctly decloaked or if AP is in your adaptors sending range
SSID Bruteforcing is also possible with this test mode.
d – Deauthentication / Disassociation Amok Mode
Kicks everybody found from AP
m – Michael shutdown exploitation (TKIP)
Cancels all traffic continuously
x – 802.1X tests
w – WIDS/WIPS Confusion
Confuse/Abuse Intrusion Detection and Prevention Systems
f – MAC filter bruteforce mode
This test uses a list of known client MAC Adresses and tries to
authenticate them to the given AP while dynamically changing
its response timeout for best performance. It currently works only
on APs who deny an open authentication request properly
g – WPA Downgrade test
deauthenticates Stations and APs sending WPA encrypted packets.
With this test you can check if the sysadmin will try setting his
network to WEP or disable encryption.
The new PWNPi v3.0 is up and now supports the 512 model – check it out when you have some time.. Thanks for using http://PWNPi.com
Kip
Hey James,
I just got my rpi. After testing the basic Debian image (which works verry well), I want to test your image. But I can`t get it run on the rpi. I prepared the 8gb SD card on win7 with the diskmanager32 and on ubuntu with dd…… but in no dass, the rpi is booting.
Have you an idea, what cause the issue?
Thanks.
Chris
(Form getmany)
The new PWNPi v3.0 is up and now supports the 512 model – check it out when you have some time.. Thanks for using http://PWNPi.com
Kip
Hi,
I have a problem installing Pwn Pi on my Raspberry Pi model b
there are also a few others which also have similar issues.
my Raspberry Pi works when i flash Raspbian “wheezy”
when when i try and flash Pwn Pi all i get is a constant red light and nothing on the display. any help would be much appreciated
regards
The new PWNPi v3.0 is up and now supports the 512 model – check it out when you have some time.. Thanks for using http://PWNPi.com
Kip
Hey! Is it possible to get a build that does not have XFCE installed on it? Or can it be removed with apt? Id love a CLI only version of this distribution
The new PWNPi v3.0 is up and now supports the 512 model – check it out when you have some time.. Thanks for using http://PWNPi.com
Kip
Hi,
a while ago I downloaded the image and was quite happy for it, since I do pentests for a living. However I got my new 512MB box and it does not boot on it.
Any ideas? I do see the green LED blinking shortly and then nothing no activity at all.
I even rewrote the image to the SD card same effect. Wrote an archlinux image to the same SD card it boots.
When connected to a tv via HDMI I do not see anything happening.
Regards,
Konstantin
The new PWNPi v3.0 is up and now supports the 512 model – check it out when you have some time.. Thanks for using http://PWNPi.com
Kip
Hello,
Been attemtping to find out what is wrong as i want and need pwnpi on my 512 raspi.
After i flash the image and boot up the raspi, i get NO video on HDMI or RCA, all other images work such as wheezy and rbmc, but not pwnpi.. just no video.
Can you please help?
The new PWNPi v3.0 is up and now supports the 512 model – check it out when you have some time.. Thanks for using http://PWNPi.com
Kip
Hi,
There are a lot of issues with the PwnPi not booting on the newer Raspberry PI’s.
Its easily fixed by copying the newer firmware files on the /boot/ partition.
I was wondering if you could make a new image (2.0.1 perhaps) which have these new updates files already in place?
Saves a lot of people a lot of headaches
Michiel
The new PWNPi v3.0 is up and now supports the 512 model – check it out when you have some time.. Thanks for using http://PWNPi.com
Kip
I have 7 Pis, all working, running various distros. I tried PwnPi 2.0 on several of them. The checksum is valid. I tried SanFisk 4G Class 4, PNY 16G Class 10, the same HDSDs that boots Rasbian with no problem. I get *no* response whatsoever. Just the single red power LED. Any suggestions?
The new verision is up, check it out when you have time http://www.pwnpi.com